How to Get a Toyota Replacement Key
If your Toyota key fob isn't working properly, you may need an alternative battery. It's simple to open the case and insert a flat tool, like a screwdriver. Replace the old battery with a new one after carefully taking out the old one.
While this isn't a complete solution, it can aid you in getting back on the road. If you have any questions regarding our Key Replacement Protection that is included in our Tire and Wheel Protection plan, please contact us.
How do I obtain a replacement key
We all have keys that go missing at some time or another. It's not always as complicated as retracing steps and looking for the areas where you typically leave keys. Sometimes, you might have a more significant issue like a key fob that's not working, or worse losing it completely. If your key fob does not work, it may need replacement batteries or changing the programming. Fortunately, there are some options to get an Toyota replacement key fob for your car, truck, or SUV.
The first step is to determine if the key has been lost. If it was lost, you'll need to bring a blank key to your local Toyota dealer and get it cut. keys for toyota G28 Car Keys 'll need to provide proof of ownership, like your registration or insurance card. If you do not have these documents, the dealer will find your key code by using the VIN number of the vehicle. This will stop thieves from hot-wiring your vehicle and stealing it.
You can make use of an app to locate your key that you lost. The Toyota Key Finder App is available for all of the latest models from the Toyota brand. It works with Bluetooth(r) which enables your key to emit a signal that can be detected by your smartphone or tablet. The signal is strong enough to be able to reach your phone but not so strong that it could interfere with other devices in your office or home.
You can also take your key fob to an electronics store or automotive parts distributor to have it repaired. These places are typically capable of programming an entirely new key for your Toyota and will most likely have the part you require in stock. You may also need to show some form of identification, depending on where you are and the policies of the store.
If you're replacing the Toyota key fob, you'll want to make use of OEM parts to ensure correct fit and performance. It is recommended to purchase the component directly from the manufacturer since it's designed specifically to fit your vehicle model and year and is able to meet the strict safety standards.
Replacing the Battery
It may be time to replace your battery if you feel your car's has died, or if you notice that your key fob isn't responding as quickly when you press the buttons. A new battery will remove the sluggishness, and give your car a better chance of starting even in the winter or following an overnight stay in a parking lot. Follow these easy steps to replace the battery.
Close the hood, turn off the engine and then set the parking brake. The battery is typically mounted on a tray that is located at the front of the engine compartment. There will be two terminals that are black (negative) and one red (positive) and which is where the cables are.
Use a wrench to loosen the bolt that tightens the negative cable connector on the battery terminal. Take the terminal and cable off. Be careful not to drop the battery as it may be exploding or leak. Place the battery in a secure area, and be careful not to harm any electrical wiring or other components in the engine bay.
It is also advisable to use an anti-corrosion spray on the battery terminals and battery tray prior to installing the new battery. This will help to stop corrosion and help make the battery last longer.
Find the clamp or mounting plate that is used to secure the battery once you are ready to install it. The positive terminal on the battery should match the positive terminal on the clamp or mount. Then lower the battery into the tray and re-attach the mount or clamp.
Repeat the process for the negative battery terminal. Use a wirebrush for cleaning the terminals, connectors and clamps on the battery tray. Spray the ends of the positive and negative battery terminals with a solution to prevent corrosion to help prolong the life of your new battery.
Replacing the Key Fob
The key fob allows you to lock or unlock your car with a simple push of a button. It can be difficult to make the fob work again if it is damaged or the battery has died. It's easy to replace the fob at home. Here's how:
The first step is to take your key from the fob. It is recommended to have a flat tool such as an screwdriver or coin to open the case. You can use a detachable Toyota key to open older models, but newer models require you to insert the key through an slot.
Once you have the case open, locate the circuit board and note the location of where the battery is placed (it's best to snap a photo with your phone to help you identify). Then, you can remove the battery that was in use and replace it with a fresh one. Check out the owner's guide or our service center in case you aren't sure of the type of battery that your Toyota fob requires.
Close the case with care after installing the new battery, and test your Toyota fob. If it doesn't, you can always open the case to ensure that the battery is in correctly and that all connections are in good order.
If everything looks good and everything is in order, you can drive your Toyota again with confidence! If your key fob isn't functioning after replacement It's a good idea to contact our service department to have an inspection and repair. Our staff is available to assist you with all of your automotive needs. If you're in need of an replacement key fob or a new transponder chip, we've got you covered. Contact us now to make an appointment. We look forward to serving you.
Replacing the Transponder Chip
Transponder chips are found in a lot of modern cars. These chips communicate with the immobilizer system. This blocks unauthorized access to the vehicle and its engine. If you lose your key fob, or it stops working, you'll need to get the transponder chip replaced. This can be done by a locksmith or at the dealership. A professional locksmith is more likely to have the right tools to complete the task.
Find a blank Toyota Key and have it duplicated at an area locksmith. They will have the right equipment and can do it much cheaper than the dealership. You'll require a master-key in order to program the new one. You can typically get these keys from a locksmith, dealer or even online.
The chip in a Toyota is held on with split pins which can only be reached when the key is extended half-way. You can use a screwdriver or whatever you're using to slowly take the plastic from the interior key. YouTube has many videos that can assist you. Once the transponder has been removed, you can tape it temporarily. Then, put the key with the chip removed back in the housing and clamp it down tightly. Seal the cuts with super glue, if required.
Insert the master key into the ignition cylinder, but do not turn. Press and release the gas six times in 20 seconds. The security light will blink to indicate that the key has been registered.
Replace the battery and test your key fob to confirm that it's working correctly. If it doesn't work then open the case to check the battery and connections. If you're still having trouble call a locksmith company that is specialized in automotive keys for the most reliable solution. USA Lock & Key can offer quick and efficient Toyota key services.